Understanding The Differences In Our Materials

We offer 4 wallpaper materials as follows:

 
SEAMLESS WALLPAPER
TRADITIONAL
WALLPAPER
VINYL
WALLPAPER
REMOVABLE
PEEL & STICK
COST PER SQ METRE
185/SQM 185/SQM 145/SQM 185/SQM
INSTALLATION
Installation is included
Installation is included
Installation is included
Installation is NOT included
APPLICATION
Pasted to the wall
Pasted to the wall
Self adhesive/sticker
Self adhesive/sticker
JOINS
Zero Joins -  installed as one full sheet
Butt Joins - (where two tiles butt up against eacher) every 125cm
Overlapping Joins - installed with 1cm overlapping joins every 150cm
Overlapping Joins - installed with 1cm overlapping joins every 135cm
JOIN VISIBILITY
Joins are not visible due to being a 100% seamless material
Butt joins are visible but they are very subtle with minimal visibility 
Due to vinyl being a thinner material its overlapping joins cast shadows. Vinyl joins are the most visible type of join. Joins are less visible on darker and busier designs
This material's overlapping joins have minimal visibility and are hard to see. This is because the material is thick and does not cast any shadows on joins. 
COLOURS
Prints yield high saturated colours so best for full colour designs. White, pastel and light designs produce cooler colours and grey whites. In some lighting, whites and pale greys printed on this material can produce a hint of magenta so ordering a sample for light and grey designs and testing them in your room's lighting is an absolute must 
Colours are less saturated. Prints yield softer and warmer whites so better for light, white, pastel and grey coloured designs. Darker, bolder colours printed on this material are not as vibrant so if ordering a full colour design, we recommend ordering a sample first 
Prints yield high saturated colours so great for full colour designs. 
White and light designs can sometimes produce cool/bluish whites. In some lighting, whites and pale greys printed on this material can produce a hint of magenta so ordering a sample for light and grey designs and testing them in your room's lighting is an absolute must
Prints yield medium saturated colours so perfect for both full colour AND white, pastel, grey and light coloured designs
WHITE TONE cool pale grey/white warm cream/white  cool bluish/white white
WALL COVERAGE
99% Block Out. Covers small wall blemishes like fine cracks easily. Can be installed over darker coloured painted walls like dark blue or black. Cannot cover bumps or deep cracks in your wall
50% Block Out. Wall must be light or white in colour with absolutely no blemishes or discolouration
50% Block Out. Wall must be light or white in colour with absolutely no blemishes or discolouration
99% Block Out. Covers small wall blemishes like fine cracks easily. Can be installed over some medium coloured walls but not dark blues or black. 
Cannot cover bumps or deep cracks in your wall
INCOMPATIBLE WALL SURFACES
Cannot be installed on hi gloss, enamal, glass, metal or painted veneers and varnished woods. Cannot stick long term to walls painted with oil based paints or with heavy texture or stippling.
Cannot be installed on hi gloss, enamal, glass, metal or painted veneers and varnished woods. Cannot stick long term to walls painted with oil based paints or with heavy texture or stippling 
Cannot stick long term to walls with heavy texture or stippling.
Cannot be installed on hi gloss, enamal, glass, metal or painted veneers and varnished woods. Cannot stick long term to walls painted with VOC, stain resistant or oil based paints. Stain resistant paints like Jotun Fenomastic and most Benjamin Moore paints will cause peeling. 
Cannot stick long term to walls with heavy texture or stippling.
Cannot be installed on hi gloss, enamal, glass, metal or painted veneers and varnished woods. Cannot stick long term to walls painted with VOC, stain resistant or oil based paints. Stain resistant paints like Jotun Fenomastic and most Benjamin Moore paints will cause peeling. 
Cannot stick long term to walls with heavy texture or stippling.
LONGEVITY
Uses the strongest glue that has the best longevity in the UAE climate. It tolerates the hot walls of UAE homes and constant AC well. Lasts 5 -10 years
Uses a strong waterbased glue that has great longevity in the UAE climate. Lasts 5 - 10 years
Uses medium strength glue that has good longevity in the UAE climate provided it's not installed on hot walls, near strong AC vents or installed on a stain resistant paint. 
Lasts 3 - 8 years
Uses medium strength glue that has good longevity in the UAE climate provided it's not installed on hot walls, near strong AC vents or installed on a stain resistant paint. 
Lasts 3 - 8 years
TEXTURE
Has a subtle fabric texture with a very subtle sheen in some lighting conditions. This textile is scratch resistant
Has a smooth paper texture and is completely matte with no sheen at all 
Has a smooth vinyl texture and 
a very subtle sheen in some lighting conditions
Has a subtle fabric paper texture and is completely matte with no sheen at all. 
This textile is scratch resistant
MADE FROM
Polyester
Paper PVC/Vinyl Polyester
FIRE AND SAFETY Material is PVC free and non toxic. The glue whilst wet will temporarily omit minimal toxic fumes.  Good ventiilation is required until dry. 
Fire rating: 
B1
Material is PVC free and non toxic. The waterbased glue whilst wet will temporarily omit miminal fumes. Good ventiilation is required until dry
All PVC and Vinyl materials contain chemicals and phthalates that must be given time to gas out. A well ventilated room is recommended after installation for 1-2 days to ensure all toxic fumes from the material have gassed out. Fire rating: 
B-s1, d0
Material is PVC free, non toxic, green and phthalates free wtih the highest A1 Grade fire rating. The adhesive will not omit any toxic fumes at all and is 100% safe for nurseries and for children with sensitivity to chemicals and fumes
CLEANING
Cannot be scrubbed or get wet. Only light daubs with a damp cloth
Cannot be scrubbed or get wet. Only light daubs with a damp cloth
Easy to wipe down and clean. Marterial is water resistant but not waterproof
Cannot be scrubbed or get wet. Only light daubs with a damp cloth
WET AREAS
Can endure low humidity and moisture but cannot be splashed or get wet. Do not install close to water outlets. Install above tile lines and away from wet floors
Cannot endure humidity or any water. Must not be installed in bathrooms with high humidity or high water usuage
Can endure medium humidity and light water splashing. It can be easily wiped down and provided the material is not sitting in water or left wet, can work well on bathroom walls (away from direct contact with showers)
Can endure low humidity and moisture and is splash resistant however, do not install close to water outlets. Install above tile lines and away from wet floors
HOW TO REMOVE
Must be removed by soaking and scraping or steamer. Your wall will need to be sanded and repainted after removal
Must be removed by soaking and scraping or steamer. Your wall will need to be sanded and repainted after removal
Can be peeled off but some areas may require a scrapper for stubborn areas. Your wall will need to be sanded and repainted after removal
Remove at a 180° angle while pulling slowly against itself. Wall surface will be glue/residue free. If removed slowly and carefully either minimal or no paint will be removed
REUSABLE
One use only
One use only
One use only
Provided you keep your backing paper, you can remove and reuse this wallpaper. It is also easily installed as it's repositionable